Kali2021 installing the rtl8188gu wireless network card [tl-wn726n] driver

kali2021 install RTL8188GU wireless network adapter [TL-WN726N] drive
background
TP-Link TL-WN726N Drive free version , By default, only in windows System use

 

Work needs need to be used as kali2021 Connect an external wireless network card for intranet WIFI Security testing , Hence this article

Drive installation process
1、 Find the driver corresponding to the network card
First of all, will USB Insert the wireless network card into the host , stay VMware Make the following settings in , Connect it kali

  open kali terminal ifconfig -a No wireless network card port wlan0 Etc , Because this network card does not support liunx System

Let's type in lsusb

Because the driver has been installed on this network card （ No drive ）, The chip model is clear at a glance , Namely RTL8188GU

Find the corresponding driver according to the chip signal , Search for https://github.com/McMCCRU/rtl8188gu

2、 Install the driver corresponding to the chip
First, make sure make, gcc, linux-header/kernel-devel, bc, git Has been installed correctly

Will source clone To kali

git clone https://github.com/McMCCRU/rtl8188gu
Then according to its README.md File operation

cd rtl8821CU/
sudo make
sudo make install
Default kali2021.4 perform make Will report a mistake , Because there was no screenshot at that time, the solution was put directly

As follows

 # 1, No installation bc
sudo apt-get install bc

# 2,https://github.com/aircrack-ng/rtl8188eus/issues/64
sudo apt-get install linux-headers-$(uname -r)

Problem solvable

After installation , restart kali, You can see that the wireless network card has been successfully identified

Reference resources
virtual machine kali2021 install Realtek 8811cu Network card driver

Linux General method for installing wireless network card driver
————————————————

Link to the original text ：https://blog.csdn.net/weixin_39664643/article/details/120790376