The RTSP video image intelligent analysis platform easynvr cascades to the superior platform through the national standard for playback optimization

EasyNVR Video intelligent analysis platform in 4.1 The national standard can be cascaded after the version of , As long as the third-party platform supports the national standard agreement, it can be passed GB28181 The protocol is cascaded to the superior platform . In some cases, playback fails on the upper platform after cascading , So in this article, we will take an example to explain the reason why the playback fails after a sub link .

Here we take it EasyNVR Cascade to EasyCVR Do a test on , Find out EasyCVR Internal video cannot be played . The following are the troubleshooting steps ：

1. First, check the local EasyNVR Whether the video stream can be played in .

2. confirm EasyNVR The internal video stream can be played , However EasyGBS No playback on .

3. At this point, we need to check the devices connected to other national standards to see if they can be played .

4. Confirm that other national standard videos are played correctly , So... Is basically excluded EasyCVR Its own problems , So the problem is EasyNVR and EasyCVR In transit . After testing, it is found that there are users pulling EasyNVR When watching live streaming Online ,EasyCVR It can also be played at the same time , So you need to check EasyNVR Whether the on-demand live broadcast is enabled in the channel configuration of .

5. At this point, it can be confirmed that EasyNVR Problems caused by the on-demand live broadcast configuration , After the on-demand live broadcast is turned on , The system will automatically set the EasyNVR Only when someone is watching CVR Send stream .

To solve the problem here, you only need to turn off the on-demand live broadcast and then you can watch it normally .