Creo makes a mobius belt in the simplest way

Suddenly think of using CREO How to make Mobius ring , Look for videos on the Internet , I got dizzy after reading it （PROE/CREO Average level , Only simple objects can be made ）.

Scan again , And then add a relation , I don't want to learn so much , So it's like whether there is a simple way to do it .

So I thought of twisting the strip first 180 degree , How to bend into a circle , Mobius brought it

The following is used CREO5.0 operation ,PROE Also almost .

First stretch to make a long strip , Size yourself ,

Stretch first , Fundamental selection FRONT,

Then select twist in the edit , In reference to Geometrically select the entire strip , Choice of direction RIGHT（ You can also choose other 2 Face to face , But the distortion is too abnormal ）

 

Click the green tick , Then start bending

 

 

Click on the top Definition after , Select the sketch plane , To select the connected face to bend

Reference plane selection FRONT  or TOP

How to mark coordinate system and draw lines

 

Check the box and then select 360 Degree bend ,

 

Select the... To be docked 2 A profile

 

 

 

The final results

Different angles in the twist , The results are different , Selecting different sections and different reference planes in bending will have different results （ Maybe not ）, Test your experience .