Hcip experiment (02)

1. Configuring loopback and interface IP Address

[r1]int LoopBack 0
[r1-LoopBack0]ip address 192.168.1.1 24
[r1]int g0/0/0
[r1-GigabitEthernet0/0/0]ip address 14.1.1.1 24
[r2]int LoopBack 0 
[r2-LoopBack0]ip address 192.168.2.1 24
[r2]int g0/0/0
[r2-GigabitEthernet0/0/0]ip address 24.1.1.1 24
[r3]int LoopBack 0
[r3-LoopBack0]ip address 192.168.3.1 24
[r3]int g0/0/0 
[r3-GigabitEthernet0/0/0]ip address 34.1.1.1 24
[r4]int LoopBack 0
[r4-LoopBack0]ip add 4.4.4.4 24
[r4]int g0/0/0
[r4-GigabitEthernet0/0/0]ip address 14.1.1.2 24
[r4]int g0/0/1
[r4-GigabitEthernet0/0/1]ip address 24.1.1.2 24
[r4]int g0/0/2
[r4-GigabitEthernet0/0/2]ip address 34.1.1.2 24

（ test ）

2. Configure the default route , Reach public Netcom

[r1]ip route-static 0.0.0.0 0 14.1.1.2
[r2]ip route-static 0.0.0.0 0 24.1.1.2
[r3]ip route-static 0.0.0.0 0 34.1.1.2

（ test ）

3. structure MGRE Environmental Science

[r1]interface Tunnel0/0/0
[r1-Tunnel0/0/0]ip add 10.1.1.1 24
[r1-Tunnel0/0/0]tunnel-protocol gre p2mp    （ Working mode ： Point to point ）
（ start-up nhrp, As nhrp The service side ）
[r1-Tunnel0/0/0]nhrp entry multicast dynamic 
[r1-Tunnel0/0/0]nhrp network-id 100
[r1-Tunnel0/0/0]source 14.1.1.1
[r2]int Tunnel0/0/0
[r2-Tunnel0/0/0]ip add 10.1.1.2 24
[r2-Tunnel0/0/0]tunnel-protocol gre p2mp 
（ find 10.1.1.1 To register , Use its public ownership ip To register ）
[r2-Tunnel0/0/0]nhrp entry 10.1.1.1 14.1.1.1 register 
[r2-Tunnel0/0/0]nhrp network-id 100
[r3]int Tunnel 0/0/0
[r3-Tunnel0/0/0]ip add 10.1.1.3 24
[r3-Tunnel0/0/0]tunnel-protocol gre p2mp 
[r3-Tunnel0/0/0]source GigabitEthernet 0/0/0 
[r3-Tunnel0/0/0]nhrp entry 10.1.1.1 14.1.1.1 register 
[r3-Tunnel0/0/0]nhrp network-id 100 

（ see ）

（ test ）

4. Announce loopback （ Private network all Netcom ）

[r1]rip 1
[r1-rip-1]ver 2
[r1-rip-1]network 192.168.1.0
[r1-rip-1]network 10.0.0.0
[r2]rip 1
[r2-rip-1]ver 2
[r2-rip-1]network 10.0.0.0 
[r2-rip-1]network 192.168.2.0
[r3]rip 1
[r3-rip-1]ver 2
[r3-rip-1]network 10.0.0.0
[r3-rip-1]network 192.168.3.0

（ test ）

 

（R1 Share routes to R2 and R3,R2 and R3 Routes are not shared between ）

terms of settlement ： close R1 Of Horizontal segmentation

[r1]int t0/0/0
[r1-Tunnel0/0/0]undo rip split-horizon

（ test ）