Hcip experiment

Create loopback interface

 

 

  Address partition ：
192.168.1.00000000 — 192.168.1.0/24 – The entire lan
192.168.1.000 00000 — 192.168.1.0/27 – Backbone links
192.168.1.000000 00 — 192.168.1.0/30
192.168.1.000001 00 — 192.168.1.4/30
192.168.1.000010 00 — 192.168.1.8/30
192.168.1.000011 00 — 192.168.1.12/30
192.168.1.000100 00 — 192.168.1.16/30
192.168.1.000101 00 — 192.168.1.20/30
192.168.1.000110 00 — 192.168.1.24/30
192.168.1.001 00000 — 192.168.1.32/27 – R2 Loopback
192.168.1.010 00000 — 192.168.1.64/27 – R3 Loopback
192.168.1.011 00000 — 192.168.1.96/27 – R4 Loopback
192.168.1.100 00000 — 192.168.1.128/27 – R6 Loopback
192.168.1.101 00000 — 192.168.1.160/27 – R7 Loopback
192.168.1.110 00000 — 192.168.1.192/27
192.168.1.111 00000 — 192.168.1.224/27
1.1.1.1/24 – R5 Loopback (ISP)

To configure IP Address
R1

R2

 

R3

R4


R5


R6

R7

Configure the routing

 

Enter the corresponding interface , Let run RIPV1 According to RIPV2 Rules for sending data , Realization RIPV1 and RIPV2 Interworking of

 

R7 You can also receive the corresponding route , because R6 To R7 Still used between RIPV1 agreement

 

3. Configure the default route

4. Summary R1 route

 

encryption
R1 And R2 The interface of

modify R6 Interface configuration for

 

stay R7 Create and start services on

 

stay R2 Upper mapping r3 Loopback interface 6.6.6.1

 

 

R1 Log on

 

Make the flow from R1 - R2 -R3 - R4 - R6 - R7 R2