[solo π] ADB connects multiple mobile phones

【soloπ】adb Connect a single, multiple phones

---

Prerequisite ：

1. The data line is connected and on the same network

• Use USB Connect your mobile phone to your computer with a cable , And ensure that the mobile phone and the computer are in the same LAN
• To real wireless debugging , Must be used for the first time USB The data line can be set up before wireless debugging

2. Mobile phone opens developer mode

• Click the system version number several times , Until developer mode is turned on
• Find developer mode in more settings , And enter
• Find the debug section , Turn on USB debugging , Wireless debugging ,USB Installation and other settings , Different systems , It should be different , Just watch it .

3. Computer download ADB

https://developer.android.google.cn/studio/releases/platform-tools
After downloading, download in CMD Input in ADB The command still doesn't work , Need configuration ADB Environmental Science

4. To configure ADB Environmental Science

• 1. Right click “ My computer ” → Select Properties , Click Advanced System Settings

• 2. Enter system properties , choice “ environment variable ”

• 3. Get into “ environment variable ” , find “ System variables ” , choice “Path” , Click edit

• 4. Create a new path , This path is the path of the folder you downloaded and unzipped

• 5. open CMD, Input adb version. Display the following, which can be used adb Instructions

Single equipment use

1. Use ADB Instructions

• Use instruction Open the port
  adb tcpip “ Port number ”（ The port number is usually 5555）
• Use instruction
  adb connect “IP Address : Port number ” (IP There is a colon between the address and the port : )
  • ip Address check ： Execute the order first adb shell netcfg Then execute the order adb shell ifconfig rmnet0

2. After successful connection , but USB The cable hasn't been pulled out yet , Show two devices , The first is through USB Identify to , The second is through WIFI Identify to , But it's all the same phone ; Pull out USB After the line , Show only one device , Namely WIFI Connected mobile phone

Use of multiple devices

1. Use ADB Instructions
The first cell phone

• Use instruction adb devices device The former is the equipment number
• Use instruction
  adb -s “ Device number ” tcpip “ Port number ” The port number is usually 5555
• Use instruction
  adb connect “IP Address : Port number ” (IP There is a colon between the address and the port : )

Second cell phone

• Use instruction adb devices device The former is the equipment number
• Use instruction
  adb -s “ Device number ” tcpip “ Port number ”
• Use instruction
  adb connect “IP Address : Port number ” (IP There is a colon between the address and the port : )

2. Pull out USB Behind data line , There are two mobile devices available

Refer to the website ：https://www.cnblogs.com/luos66/p/15788271.html