Alkylation process test questions and simulation test in 2022

Source of question bank ： Safety production simulation test, a little public official account.

2022 The title of alkylation process work license in is alkylation process theory question bank, new textbook outline question bank ！2022 The alkylation process examination questions and simulation examination are based on the new version of the alkylation process examination question bank . Alkylation process operation test questions shall be practiced in the previous chapters at any time according to the safety production simulation test .

1、【 Single topic selection 】2008 year 10 month 28 Revised at the fifth meeting of the Standing Committee of the Eleventh National People's Congress on September 《 Fire control law of the people's Republic of China 》 take ( ) The implementation of .（ B ）

A、2008 year 10 month 28 Japan

B、2009 year 1 month 1 Japan

C、2009 year 5 month 1 Japan

2、【 Single topic selection 】PID in P The meaning is ( ).（ C ）

A、 differential

B、 integral

C、 The proportion

3、【 Single topic selection 】SIL-1 Level requires the average probability of failure of safety instrumented system every year PFDavg% by ( ).（ A ）

A、1-10

B、0.1-1

C、0.01-0.1

4、【 Single topic selection 】 The following wastes in hydrofluoric acid plants are non alkylable ( ).（ C ）

A、 Waste desiccant

B、 Calcium fluoride

C、 Acid soluble oil

5、【 Single topic selection 】 The fastest burning of the following substances is ( ) body .（ A ）

A、 gas

B、 Liquid

C、 solid

6、【 Single topic selection 】 Chemical plant fire accident , First, it should be cut off effectively ( ).（ C ）

A、 Steam

B、 Gas

C、 Flammable 、 Fuel

7、【 Single topic selection 】 Hydraulic pressure test pressure of pressure vessel design pressure ( ) times .（ C ）

A、1.0

B、1.10

C、1.15

8、【 Single topic selection 】 The accuracy of the bimetallic thermometer is ( ).（ C ）

A、0.5-1.0

B、1.0-1.5

C、1.0-2.5

9、【 Single topic selection 】 The first requirement of the principle of sustainable development is ( ).（ C ）

A、 Protect and improve the ecological environment

B、 Coordinate social and economic development

C、 Meet the basic needs of the people

10、【 Single topic selection 】 For containers containing flammable liquids , There should be no less than ( )% On the sidelines of .（ C ）

A、3

B、4

C、5

11、【 Single topic selection 】 root 50204-2002（2011 Edition of ） requirement , The incoming reinforcement must be tested for the weight deviation of reinforcement , When measuring the weight deviation of reinforcement , Samples shall be taken from different reinforcement , The length of each sample shall not be less than ( )mm.（ D ）

A、100

B、300

C、350

D、500

12、【 Single topic selection 】 Pre evaluation of occupational hazards of construction projects and evaluation of control effect of occupational hazards , It shall be provided by..., who has obtained corresponding qualification according to law ( ) To undertake .（ B ）

A、 Evaluation organization

B、 Occupational health technical service organization

C、 Occupational health testing institutions

13、【 Single topic selection 】 When a power failure occurs, the correct sequence of processing steps is ( ).(1) Cut off the olefin feed (2) Cut off the product from the device (3) Cut off the heat source of each heater (4) Cut off the boundary control of each acid ladle （ C ）

A、1.2.3.4

B、2.3.1.4

C、3.2.1.4

14、【 Single topic selection 】 When neutralizing the waste gas from hydrofluoric acid alkylation unit , When the concentration of sodium hydroxide (wt%) Reduced to ( ) It can be discharged into the waste alkali mixing tank as waste alkali .（ B ）

A、0.1%-0.2%

B、0.2%-0.5%

C、0.5%-1%

15、【 Single topic selection 】 The storage amount of paint in the workplace generally does not exceed ( ) Angel dosage , Do not store too much .（ C ）

A、4

B、3

C、2

D、1

16、【 Single topic selection 】 Ambient heat intensity WBGT The index means , Unrelated to the following factors are ( ).（ C ）

A、 temperature

B、 Thermal radiation

C、 Labor intensity

17、【 Single topic selection 】 The production and business operation entities shall report the of the emergency plan to the relevant departments or units in time ( ), And re record according to the relevant emergency plan reporting procedures .（ B ）

A、 Filing time

B、 Revision

C、 Drill situation

18、【 Single topic selection 】 We should make full use of the national investment policies in production safety and emergency rescue , Manage and use the funds well , insist ( ) principle , Give full play to the investment benefits .（ B ）

A、 Save things

B、 Pay equal attention to construction and economy

C、 Pay equal attention to the old and the new

19、【 Single topic selection 】 In the composition mechanism of the hanging basket , Providing power for the up and down movement of the suspended platform is ( ).（ C ）

A、 Linkage

B、 Suspended platform

C、 Hoist

D、 Electrical control system

20、【 Single topic selection 】 The calculation sequence of unit works is generally based on ( ) The sequence of items is calculated .（ A ）

A、 List of pricing specifications

B、 clockwise

C、 Drawing item no

D、 counter-clockwise direction

21、【 Single topic selection 】 What does not belong to small component fabricated stairs is ( ).（ B ）

A、 Wall supported stairs

B、 Folding staircase

C、 Beam supported stairs

D、 Cantilevered stairs

22、【 Single topic selection 】 The following rights do not belong to the basic rights of employees ( ).（ D ）

A、 The right to know

B、 The right to suggest

C、 The right to refuse

D、 The right to report potential accidents

23、【 Single topic selection 】 Pot of water PH The value should be controlled at ____ Between .（ C ）

A、7-8

B、8-10

C、10-12

24、【 Single topic selection 】 The construction organization design of unit project is ( ).（ B ）

A、 Prepared for single project

B、 Prepared for unit project

C、 Prepared for divisional works

D、 Prepared for subdivisional works

25、【 Single topic selection 】 The number of control loops of the process control unit is ( ) individual .（ C ）

A、1-2

B、2-16

C、2-64

26、【 Single topic selection 】 Safety production management is an important way to realize safety production ( )（ B ）

A、 effect

B、 Guarantee

C、 basis

D、 measures

27、【 Single topic selection 】 copper - The measuring range of constantan thermocouple is ( ).（ C ）

A、0-1800℃

B、0-400℃

C、-20-400℃

28、【 Single topic selection 】 After each wall is built to a certain height , It is often measured and set on the wall surface of each floor ( )m Horizontal elevation line of , As the elevation basis for indoor construction and decoration .（ B ）

A、+0.00

B、+0.50

C、+0.80

D、+1.50

29、【 Multiple choice 】 The preliminary data of the project mainly include ( ).（ ABDE ）

A、 Engineering geological investigation report

B、 Construction permit of construction project

C、 Project quality acceptance report

D、 Approval document of engineering construction project

E、 Project construction planning approval document

30、【 Single topic selection 】 The small concrete hollow block building system is flexible , The masonry is convenient , Mainly used for construction ( ).（ D ）

A、 Basics

B、 Non load bearing walls

C、 Load bearing walls

D、 Internal and external walls

31、【 Single topic selection 】 The data source unit of ready mixed concrete transportation sheet is ( ) Company .（ D ）

A、 The construction of the

B、 Supervisor

C、 testing

D、 supply commodity

32、【 Single topic selection 】 Encoded as C1 The construction data of ( ) Information .（ A ）

A、 Construction Management

B、 construction technique

C、 Construction materials

D、 Schedule cost

33、【 Single topic selection 】 The worker unilaterally terminates the labor contract during the probation period , It should be done in advance ( ) The employer shall be notified on the day .（ B ）

A、10

B、3

C、15

D、7

34、【 Multiple choice 】 The guiding construction schedule is applicable to ( ) The engineering of .（ ABDE ）

A、 The task is specific and clear

B、 The construction conditions are basically implemented

C、 The structure is more complicated

D、 The supply of various resources is normal

E、 The construction period is not too long

35、【 Single topic selection 】 The evaluation of material suppliers does not include ( ).（ C ）

A、 throughput

B、 Social credibility

C、 Delivery speed

D、 Quality assurance capability

36、【 Multiple choice 】 The main forms of construction project management organization are ( ).（ ACD ）

A、 Task force project organization

B、 Project manager project organization

C、 Department controlled project organization

D、 Matrix project organization

E、 Team type project organization

37、【 Multiple choice 】 according to 《 Management measures for quality inspection of construction projects 》（ Order No. of the Ministry of construction of the people's Republic of China 141 Number ）, Witness sampling inspection includes ( ).（ ABCDE ）

A、 Testing of physical and mechanical properties of cement

B、 reinforced （ Including welding and mechanical connection ） Mechanical property test

C、 Sand 、 Routine stone inspection

D、 concrete 、 Mortar strength test

E、 Simple geotechnical inspection

38、【 Multiple choice 】 The expansion joint devices of bridge structural components and fittings are divided into ( ).（ CDE ）

A、QZ Spherical expansion joint

B、QZ Basin expansion joint

C、 Modular bridge expansion joint device

D、 Comb type expansion joint

E、 Plate rubber expansion joint

39、【 Single topic selection 】 Carbonate scale is usually ____ The site forms .（ B ）

A、 The most heated

B、 Less heated

C、 All heating surfaces

40、【 Single topic selection 】 The thickness of the rigid cushion in the terrace is generally ( ).（ C ）

A、40～80mm

B、50～90mm

C、60～100mm

D、70～110mm

41、【 Multiple choice 】 The main work of construction survey generally includes ( ).（ ABCD ）

A、 Familiar with design drawings and design data

B、 Site survey

C、 Review of pile delivery results

D、 Develop a measurement plan

E、 Technical disclosure of measurement

42、【 Single topic selection 】 It can be used outdoors , It can also be used in , Ann Full production Mock exam A little , The interior stone curtain wall is ( ).（ A ）

A、 Natural stone curtain wall

B、 Artificial stone curtain wall

C、 Stone curtain wall with skeleton system

D、 Frameless system stone curtain wall

43、【 Single topic selection 】 use HDPE The core of membrane anti-seepage technology is ( ).（ D ）

A、HDPE Incoming quality of membrane

B、HDPE Membrane machine

C、HDPE The construction season of membrane is reasonable

D、HDPE Construction quality of membrane

44、【 Multiple choice 】 Method for comparison of construction schemes , Economic comparison includes ( ).（ ACD ）

A、 Compare the investment amount of different schemes

B、 Compare the economic planning of different schemes

C、 Compare the degree of reusability of means and materials or added construction machinery in the investment of different schemes

D、 Compare the contribution of different schemes to the growth rate of construction output value

E、 Compare the safety and reliability of different schemes

45、【 Multiple choice 】 Concrete retarder is mainly used for ( ) Construction of .（ ACDE ）

A、 Concrete in high temperature season

B、 Steam cured concrete

C、 Mass concrete

D、 Slip form process concrete

E、 Commercial concrete

46、【 Single topic selection 】 Constraint reaction force of smooth facing object , Acting at the point of contact , Its direction is along the common normal line of the contact surface ( ).（ B ）

A、 Point to the stressed object , For pressure

B、 Point to the stressed object , For support

C、 Away from the stressed object , For support

D、 Away from the stressed object , For pressure

47、【 Single topic selection 】 The tax policy that our country implements to the individual account fund of basic endowment insurance is ( ).（ C ）

A、 Levy 20% Interest tax

B、 Levy 5010 Interest tax

C、 Exemption from interest tax

D、 Levy 10% Interest tax

48、【 Multiple choice 】 The safety expenses of construction projects shall be used for ( ), It shall not be used for other purposes .（ ABC ）

A、 Procurement and updating of construction safety protection appliances and facilities

B、 Implementation of safety construction measures

C、 Improvement of safety production conditions

D、 Salary and welfare of safety management personnel

49、【 Multiple choice 】 The key points of quality control of lime stabilized soil , The compactness adopts ( ) Spot check on each floor .（ ABC ）

A、 Ring knife method

B、 Sand filling method

C、 Irrigation method

D、 Grouting method

E、 Wax sealing method

50、【 Multiple choice 】 The blowdown mode of boiler is divided into :（ AB ）

A、 Continuous blowdown

B、 Regular blowdown

C、 rinse

51、【 Judgment questions 】 Generally, carbon dioxide is used for inert gas replacement 、 Steam and nitrogen .（ √ ）

52、【 Judgment questions 】 Models for WNS1-1.0-Y The boiler of represents horizontal internal combustion oil fired boiler .（ √ ）

53、【 Judgment questions 】 In order to improve the friction performance , Make the packing seal have enough service life , Media leakage is not allowed .（ × ）

54、【 Judgment questions 】 Prevent fire in chemical production 、 The basic measure of explosion is to limit fire hazards 、 Combustion aids 、 The three sources of fire interact directly with each other .（ √ ）

55、【 Judgment questions 】 The installation of pressure pipes shall be undertaken by units with on-site installation experience of pressure vessels .（ × ）

56、【 Judgment questions 】 If you find a fire, call 119 Telephone alarm , There is no charge for fire fighting by the fire brigade .（ √ ）

57、【 Judgment questions 】 The quality plan shall focus on quality control , From process 、 Sub project 、 Process control from divisional works to unit works , It also reflects the whole process control from resource investment to the completion of the final inspection and test of the project .（ √ ）

58、【 Judgment questions 】《 Boiler safety technical supervision regulations 》 Regulations , When the system needs to supplement organic heat carrier during the normal operation of the boiler , The cold organic heat carrier shall be first injected into the expansion tank , Then the organic heat carrier is indirectly injected into the main circulating circuit of the system through the expansion tank .（ √ ）

59、【 Judgment questions 】 The combustion of combustible gas ejected from the pipe and occurring at the pipe orifice belongs to diffusion combustion .（ √ ）

60、【 Judgment questions 】 The combustion of flammable liquid includes mixed combustion and diffusion combustion · Ann whole Production simulation exam A little · Burning points .（ × ）

61、【 Judgment questions 】 Solid waste generators shall unconditionally utilize industrial solid waste .（ × ）

62、【 Judgment questions 】 The height of a single storey building is 2.20m And above, half area shall be calculated .（ × ）

63、【 Judgment questions 】 Supervision data can be divided into six categories .（ √ ）

64、【 Judgment questions 】 In solid combustion , If it's a complex substance , First decompose when heated , Precipitate gaseous and liquid products , Then vapors of gaseous and liquid products ignite .（ √ ）

65、【 Judgment questions 】 An emergency rescue organization shall be established on the construction site , train 、 Provide emergency rescue personnel , Organize employees to carry out emergency rescue drills from time to time .（ × ）

66、【 Judgment questions 】 After the control system is put into operation for a period of time , All kinds of problems may arise , The reason must be the problem of the instrument .（ × ）

67、【 Judgment questions 】 The main structure of the building （ Like a wall 、 column 、 door 、 Windows, etc ） The plan of , The ratio is 1:50 Or greater than 1:50 when , The wall facing materials shall be drawn with thin solid lines , Ann Whole life Production simulation test 1 Diantong , Material outline .（ √ ）

68、【 Judgment questions 】 The stop point is a special point , That is, this process has not been inspected , It has not been determined whether it is qualified or not , Whether to carry out the next process , Only those who come to the conclusion that they are qualified can proceed to the next process .（ √ ）

69、【 Judgment questions 】 In the course of production , Process parameters mainly refer to temperature 、 pressure 、 Traffic 、 level 、 Material proportioning, etc .（ √ ）

70、【 Judgment questions 】 The task of safety inspection is to discover and find out all kinds of dangers and hidden dangers , Urge the rectification ; Supervise the implementation of various safety management rules and regulations ; Stop illegal command 、 Illegal operation .（ √ ）

71、【 Judgment questions 】 Occupational health examination during on-the-job period , The employer shall act in accordance with 《 Technical specification for occupational health monitoring 》(GBZ188) And other national occupational health standards , Determine the inspection items and inspection cycle of workers exposed to occupational disease hazards . What needs to be reviewed , Corresponding inspection items shall be added according to the review requirements .（ √ ）

72、【 Judgment questions 】 The commonly used inert gas is nitrogen 、 Carbon dioxide 、 Steam 、 Helium, etc .（ × ）

73、【 Judgment questions 】 The type of roof and the roof material of the building 、 Roof structure type and architectural modeling requirements .（ √ ）

74、【 Judgment questions 】 The approval page of the emergency plan can be released only after being approved by the main person in charge of the issuing unit .（ √ ）

75、【 Judgment questions 】 The construction schedule is not included in the construction scheme .（ × ）

76、【 Judgment questions 】 The world trade organization (W. newest analysis .TO) The definition standard may include or be specifically specified for the product 、 A term for a process or production method 、 Symbol 、 Packaging standards or labeling requirements .（ √ ）

77、【 Judgment questions 】 The construction unit shall set up safety signs according to the general layout of safety signs .（ √ ）

78、【 Judgment questions 】 According to the principle of chemical equilibrium movement , Reduce temperature 、 Increasing the pressure is conducive to the formation of ammonia .（ √ ）

79、【 Judgment questions 】 Forced draft fan is the equipment used to transport air in air conditioning system .（ × ）

80、【 Judgment questions 】 office 、 group 、 Public institutions shall conduct fire prevention inspection at least once a quarter , Other units shall conduct fire prevention inspection at least once a month .（ √ ）

81、【 Judgment questions 】 House building works 、 The qualification grade of general contracting enterprises for municipal public works construction is divided into grade I 、 second level 、 Level three .（ × ）

82、【 Judgment questions 】 To prevent gas leakage , The gas pipeline shall not pass through the warehouse storing inflammables and explosives , Distribution and transformation room 、 Places with explosion and fire hazards such as cable rooms and ventilation ducts .（ √ ）

83、【 Judgment questions 】 Liquid ammonia leakage accident occurred in a factory , Emergency evacuation of irrelevant personnel , It should be shifted upwind .（ √ ）

84、【 Judgment questions 】 Sodium fluoride is not 、 Ann The whole production simulation test is a little through 、 Water soluble , Can be precipitated in water .（ × ）

85、【 Judgment questions 】 Prevention and control of water pollution should focus on prevention 、 combine prevention with control 、 Principle of comprehensive management .（ √ ）

86、【 Judgment questions 】 No floating valve shall be installed in the foam breaking area of the floating valve tray , The main reason is that there is a stable area without bubbling before the liquid enters the downcomer , To prevent the liquid from carrying a large amount of foam into the downcomer .（ √ ）

87、【 Judgment questions 】 The frame type glass curtain wall has a rigid connection between the skeleton and the main building , Defects greatly affected by building deformation .（ √ ）

88、【 Judgment questions 】 Obvious fire prevention signs shall be set at key parts of fire safety , Carry out strict management .（ √ ）

89、【 Judgment questions 】 Leakage of liquid ammonia storage tank , Spray the leakage point with mist water immediately , To reduce environmental pollution .（ √ ）

90、【 Judgment questions 】 The UK attaches great importance to project risk assessment , Each construction site shall fill in the corresponding risk assessment form , And there are instructions for site safety assessment .（ √ ）

91、【 Judgment questions 】 The storage period of the canister is 2 year , Beyond the time limit, it is necessary to re identify .（ √ ）

92、【 Judgment questions 】 The quality assessment criteria for masonry materials include 《 Autoclaved lime sand brick 》GB11945-1999.（ √ ）

93、【 Judgment questions 】 In order to ensure the accuracy of weighing each tray of raw materials for mortar mix proportion and concrete mix proportion , Firmly adopt the weight ratio , Volume ratio is strictly prohibited , Mechanical mixing shall be adopted .（ √ ）

94、【 Judgment questions 】 Environmental pollution can be divided into air pollution according to environmental factors 、 Water pollution and soil pollution .（ √ ）

95、【 Judgment questions 】 Medical treatment shall be carried out first after alkali liquor burns of on-site operators .（ × ）

96、【 Judgment questions 】 The production scale is small 、 Production and operation units with few risk factors , Comprehensive emergency plan and special emergency plan can be compiled together .（ √ ）

97、【 Judgment questions 】 oil 、 The combustion of liquids and solids such as wood and plastics belongs to heterogeneous combustion .（ √ ）

98、【 Judgment questions 】 Occupational disease prevention facilities , Including equipment and facilities to reduce the intensity or concentration of occupational hazard factors , It also includes relevant buildings and structures .（ √ ）

99、【 Judgment questions 】 Reactor with catalyst 、 The comprehensive inspection of large pressure vessels with filler shall be conducted once every six years .（ × ）

100、【 Judgment questions 】 Closed transportation can effectively reduce VOC emission .（ √ ）

Support the examination questions of precise alkylation process in all regions of the country , Support safety certificate , Special operation certificate , Exercises on the question bank of vocational skill appraisal and other types of work .