Supplementary notes on Relevant Issues of complete model group

1、 About the complete model group I Modification of car model suspension .
answer ： It is allowed to add the original spring for reinforcement , Glue application is allowed , Add fixed parts to fix the suspension .

2、 Wireless serial port , bluetooth ,WiFi Whether the wireless communication module is allowed to be used for departure ？
answer ： Allow the use of wireless serial port , Bluetooth module ,WiFi The module is used for the debugging and departure of the car model , But it can only be used for departure during the race , It cannot be used for remote control of car models .

3、 The screen , Key ,USB Development dock , Is it allowed to place the extension wire of the mesh port outside the car shell ？
answer ： Such auxiliary tools are allowed to be fixed outside the vehicle shell .

4、 Open a hole in the camera 5*5 Whether the window of is allowed ？

answer ： Allow opening windows , But it needs to be refitted into a movable cover , Not completely hollowed out .

5、 Whether the aircraft model battery can be connected to the voltage display to prevent over discharge , Whether to remove the voltage display during the competition ？
answer ： Voltage display module can be added , Ensure that it is firmly fixed during the competition , The treatment method is the same as that of article 3 strip .

6、 Whether the car shell can be perforated for heat dissipation ？
answer ： Hollowing and punching are allowed for shell operation , Let air flow in for heat dissipation .

7、 When the board is disconnected from the network, you can apply for re timing , Or if the connection is disconnected, you must race again ？
answer ： Allow car models to start online , If the network vehicle model cannot operate normally when the vehicle is interrupted , Then this departure failed , Need to start again . It does not affect the other achievements in the multiple achievements .

8、 Online arena , Whether the construction area can be placed symmetrically due to the restriction of the environmental area ？ Whether it is a standard track after being placed symmetrically ？
answer ： It can be placed symmetrically , After being placed symmetrically, it is still a standard track .