Introduction to common source oscilloscope software and RIGOL oscilloscope upper computer software ns-scope

   1、 Software overview

        ◆ In order to solve the complicated operation process of oscilloscope test 、 Complex parameter configuration and other problems ,Namisoft Developed NS-Scope Oscilloscope automatic test program control software , Through the program control of oscilloscope , Realize automatic parameter configuration 、 Data acquisition and data storage , The software has its own database storage , It is convenient for users to query historical detection data , Maximize the efficiency of the instrument .

        2、 The main function 　　

　　◆ Remote control of a single / Multiple oscilloscopes , Acquisition parameters 、 The waveform is fully automatic .

　　◆ Compatible with all on the market with USB、LAN Oscilloscope with any program-controlled interface , Such as ： American Tektronix （Tektronix）、 The United States is German technology （Keysight）、 Puyuan et al .

　　◆ Automatically save acquisition parameters 、 Waveform to database , It is convenient to inquire at any time .

　　◆ Automatically generate collection report , The user can choose the data independently 、 Choose the path .

　　◆ The acquisition mode can be set 、 Waveform display mode 、 Measurement setup 、 Measurement display and other functions , Easy to use in different situations .

　　◆ Easy to operate , Increase of efficiency , Even users who do not understand oscillograph can directly control oscillograph with this system .

      3、 Compatible instruments

      ◆ teck Tektronix、 It's German technology Keysight、 Puyuan Rigol、 Liko 、 Rod and Schwartz R&S And other brands .

        4、 Software requirement

  Software environment

l Windows/XP SP3 And above ;

l  NI-VISA drive ;

l sqlite database .

Hardware environment

l  The computer CPU requirement ： Two threads ,2GHz Above the dominant frequency ;

l  Computer memory requirements ：1G;

l  Computer hard disk requirements ：4G The above space .

      5、 Software flow chart

     6、 Software function introduction

     6.1、 Software main interface

　　NS-Oscilloscope Main interface of oscilloscope program control software

　　6.2、 Instrument connection interface

　　 Before entering the test , Select the instrument to be connected .

　　6.3、 Storage setting interface

　　 Click the storage settings button , Optional data storage or oscilloscope screenshot storage , And data type and storage path .

　　6.4、 Instrument setting interface

　　 In this interface , Time base can be adjusted 、 passageway 、 Trigger 、 cursor 、 Set the measurement item . First set up , Click settings to select data plot or oscilloscope screenshot .

　　◆ Time base setting . Selectable gear 、 bias 、 Record the length and other parameters .

　　◆ Channel settings . Multiple channels can be selected , For channel color 、 gear 、 Probe factor 、 Terminal impedance 、 bias 、 Set the bandwidth limit parameters .

　　◆ Trigger settings . Trigger channel can be selected 、 Trigger edge 、 Trigger electrical equality parameter .

　　◆ cursor . Click the cursor to view the cursor keys corresponding to each channel .

　　◆ Measurement setup . The measurement items can be selected in the table , Maximum 、 minimum value 、 Average value, etc. .

　　6.5、 Run the test interface

　　 Normal triggering and with cursor and measurement item .

　　 Running test interface diagram

　　6.6、 Storage of oscillograph

　　6.6.1、 Automatically saved screenshot of oscilloscope .

　　6.6.2、 Save manually . Click the Save button in the lower right corner , The waveform storage interface pops up , The number of storage screens can be selected , Storage type , Storage address , Click ok , It will be saved according to the set path .

　　 Manually save the waveform storage interface

　　6.6.3、 Turn on the afterglow function . Click the all continuous trigger button , Waveform diagram interface .

　　6.7、 Data storage interface

　　 The system can save TDMS and CSV Files in two formats .

　　TDMS file