Printer connection mode

A very detailed picture and text today , Step by step, I will teach you how to connect the computer to the printer , As soon as we see it , It's simple .

1、 First, make sure the printer can be used normally , And then usb The data cable connects the computer to the printer .

2、 Click... On the main interface of the computer “ Start ”（ In the figure 1）, And then click “ Control panel ”（ In the figure 2）.

3、 After entering the control panel , Select... From the options “ Hardware and sound ”（ The box in the figure shows ）, Click to enter .

4、 Then select in the pop-up dialog box “ Devices and printers ”（ The box in the figure shows ）, Click to enter .

5、 Click to enter the device and printer settings page , Click on “ Add a printer ”（ The box in the figure shows ）.

6、 Select... In the pop-up interface “ Add a local printer ”（ The box in the figure shows ）, Then click to enter .

7、 Select the port type of the printer （ In the figure 1） The general instructions have , And then click “ next step ”（ In the figure 2）.

8、 First select the manufacturer of the printer in the option list （ In the figure 1） And printer model （ In the figure 2）, If the brand and corresponding model of the printer can be selected , After selection, you can directly proceed to the next step for installation . If the printer brand or model cannot be found in it ,（ In the figure 3） Or it has its own driver or it can be installed on CD-ROM “ Install from disk ”.

9、 Use “ Install from disk ” Click and select... In the pop-up dialog box “ Browse ”（ The box in the figure shows ）.

10、 Then find the driver of the printer from the disk （ In the figure 1）, Then click Open （ In the figure 2）.

11、 Then it will return to the previous interface , Click in the interface “ next step ”（ The box in the figure shows ）.

12、 Then enter the name of the printer （ In the figure 1）, Click... After the book is finished “ next step ”（ In the figure 2）.

13、 installation is complete , There will be a shared setting . If you need to share, press next to set , If you don't need to share it with others, you can complete the installation by pressing cancel .

14、 You can test whether the connected printer is normal by printing test paper . If it fails, you can check whether the printer power is on , Whether the line connected with the host is well connected , Whether the driver of the printer is installed with the wrong model, etc .