Network remote access raspberry pie (VNC viewer)

One 、 Download tool

① Raspberry pie mirror image
Download address
After entering the official website , Click to view all downloadable options ：

There are three different versions ：

With graphical desktop and recommended software ：Raspbian Stretch with desktop and recommended software
Desktop with graphics （ Recommended ）：Raspbian Stretch with desktop
The minimalist version ：Raspbian Stretch Lite

② Formatting tool
This use SDCardFormatterv5, You can choose other tools
③ Image burning tool
This use Raspberry Pi, You can choose other tools
④VNC Viewer
https://www.realvnc.com/en/connect/download/viewer/
⑤ Remote tools
This use putty, You can choose other tools
https://www.chiark.greenend.org.uk/~sgtatham/putty/

Two 、SD Card format

① take SD Insert into the card reader , Then plug the card reader into the computer .
② Open the formatting tool SDCardFormatterv5.
③ Select what you want to format SD card .
④ Select the dialog box that pops up , choice “ yes ”.
⑤ And then it pops up , Prompt for formatting completion , Select OK , It's done. SD Card formatting .

3、 ... and . Burn image

① Open the burning tool raspberry pi.
② Click on “CHOOSE OS”, Select the image file you just downloaded , And then click “CHOOSE SD CARD” Select the just formatted SD card , Then click WRITE.
③ Then a dialog box will pop up , choice “Continue/OK”, then , And started burning .

Four . configure network

Use mobile hotspot
① On the computer , Open the burning image just now SD card .
② stay boot Under the table of contents , Build a ssh Empty file .
③ stay boot Under the table of contents , Create a text file first .
④ open the text file , Copy the following into the text .

country=CN
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
update_config=1

network={
    
	ssid=" Your wireless network name "
	psk=" Your wireless password "
	key_mgmt=WPA-PSK
	priority=1
}

among , take ssid Change the content of to the name of the mobile hotspot ,psk Change the content of to the password of the mobile phone hotspot .
⑤ Save the text just now , And change the name to wpa_supplicant.conf.
⑥ Take out SD card , take SD Insert the card into the raspberry pie , Turn on the phone hotspot and connect the raspberry pie at the same time .
⑦ You can check the raspberry pie on your mobile phone ip Address .

5、 ... and .putty Remote connection

① open putty, stay Host Name It's about , Enter the results you just viewed IP Address , Then choose “open”.
② Select the dialog box that pops up , choice “ no ”.
③ Enter the user and password （ Default user ：pi The default password ：raspberry）.
④ Start raspberry pie VNC service , Input instruction （sudo raspi-config）, Configure raspberry pie .
⑤ Select... With the up and down keys “Interfacing Options”, Then press the left and right keys to select “Select”.
⑥ Then press the up and down keys to select “VNC”, Press the left and right keys to select “Select”.
⑦“would you like the vNc server to be enabled?”–> choice “Yes”.
⑧“The VNC server is enabled”–> Carriage return option “OK”.
⑨ Up and down key selection “Advanced Options”, Press the left and right keys to select “Select”.
⑩ Up and down key selection “Resolution”, Press the left and right keys to select “Select”.
⑪ Then there is the resolution selection , choice “DMT Mode 16”, Then choose “OK”.
⑫“The resolution is set to DMT mode 16”–> Carriage return option “OK”.
⑬ Back to the beginning , choice “Finish”, complete .

6、 ... and .VNC Viewer Remote interface display

①VNC Viewer The installation process is simple .
②VNC Viewer Use .
Open after installation VNC Viewer Interface , First enter the name of raspberry pie at the top IP Address , Then enter... In the pop-up interface Username,Password, Click on “OK”. The raspberry pie interface appears , Get it done .

7、 ... and . Reference link

Raspberry pie doesn't need a display VNC Viewer Remote connection by