Download and burn raspberry pie system image

One 、 Raspberry pie image download address

Download address of raspberry pie official website ：

Raspberry pie website
Software installation

You can download the latest on the official website Raspbian Raspberry pie system .

Two 、 Raspberry pie system image burning

Get ready ：

1. a sheet 2G The above SD Card and card reader , It's better to have a high-speed card , recommend Class4 The above cards , The speed of the card directly affects the running speed of raspberry pie , The author suggests the best 4G above , Otherwise, subsequent development will often be insufficient .
2. Use special formatting tools SDFormatter Format memory card

4. windows Install the tool to burn the image under the system ：imager_1.6.2.zip
   

   The tool is in the tool and system image directory required to build the development environment ：
   

Click on the install .

Installation steps ：

1. Unzip the downloaded system compressed file , obtain img Image file

2. take SD After using the card holder or card reader , Connect to the computer

3. Unzip and run imager_1.6.2 Tools

4. Choose... In the software img file ,“Device” Choose SD Drive letter of , And then choose “Write” And then we started installing the system , According to your SD Speed , The installation process is fast and slow .
   

5. The completion dialog box will pop up after the installation , The installation is complete , If it doesn't work , Please turn off software such as firewall , reinsert SD Installation . Please note that the installation is complete ,windows You can see under the system SD Only 74MB 了 , It's normal , because linux Disk partition under win I can't see it ！

Be careful ： After the burning is successful, the system may prompt to format the partition because it cannot recognize the partition , Do not format at this time ！ Don't format ！ Don't format ！ Click Cancel , Then eject the memory card , Insert into the back of raspberry pie micro SD In the card slot , Turn on the raspberry pie .