How to modify the channel name registered by the camera in the easygbs national standard platform?

EasyGBS yes TSINGSEE The accessible national standard developed by Qingxi video GB28181 Protocol video platform , After years of sedimentation and continuous optimization ,EasyGBS At present, it has adapted to the visual construction of video surveillance in many scenarios , And it can provide rich secondary interfaces for development . Some users need to modify the name registered by the camera in the national standard platform , In this article, we will share the operation methods .

1. Turn on the corresponding hard disk video recorder or camera , Open the image function in the configuration . If it is Haikang's camera , The interface is as follows ：

2. choice OSD Set up , And check the display name , After checking, you can modify the channel name , Save after modification .

3. After saving, re register to the national standard platform (EasyGBS/EasyCVR), At this time, we can see that the registered name has become the name we defined .

EasyGBS Currently, it supports multiple functions , Including intercom 、 Alarm, etc . The intercom system design adopts the intercom system based on network transmission , Using the network platform , Connect the command center with the help points at the front end , All communication signals and control protocols are transmitted through the network , Adopt network-based digital technology IP Network intercom system , A set of intercom system based on national standard , At the same time, the system can meet the intercom of police stations 、 Call the police 、 sound recording 、 Video surveillance 、 Public broadcasting 、 Electronic map, etc .

EasyGBS The platform supports direct download and trial , If you want to know more about voice intercom function or other functions , You can try it directly , We will all provide you with 30 Days of probation , During this period, you can carry out secondary development or call integration , Welcome to .